uPVC Door Hard to Lock? How to Tell If It Has Dropped
Repairs · 11 November 2026 · Kieran Myers

If your uPVC door has gradually become hard to lock, so you have to lift the handle with real effort, lean on the door or jiggle the key, the most likely cause is that the door has dropped slightly on its hinges. A drop of a few millimetres is enough to stop the hooks and bolts of a multi-point lock lining up with the keeps on the frame, and the lock then fights you every time. It is usually put right by adjusting the hinges and keeps, and sometimes by re-packing the glass, rather than by replacing the lock or the door.
There is a simple test. Open the door, lift the handle as if to lock it and turn the key. If everything moves freely with the door open but sticks when it is closed, the lock itself is working and the problem is alignment. If it is stiff even with the door open, the lock or its gearbox is more likely at fault. Either way, stop forcing the handle, because that is how a gearbox breaks.
How a uPVC door locks
Most uPVC doors have a multi-point lock, a long steel strip running down the edge of the door with a gearbox in the middle behind the handle. Lifting the handle drives hooks, rollers or bolts out of the strip and into keeps fixed to the frame, and turning the key then locks them there through the cylinder.
That system is what makes a modern door secure, and it is also why alignment matters so much. With several points engaging at once, every one of them has to meet its keep. If the door has dropped at the lock side, the top hook may still catch while the bottom one rides on the edge of its keep, and the handle feels heavy or stops short.
The signs that a door has dropped
Close the door and look at the gaps around it. They should be even all the way round. A door that has dropped usually shows a wider gap along the top on the lock side and a tighter one at the bottom, and it may rub on the threshold or the frame near the bottom corner.
Other signs to look for are these.
The handle has to be lifted harder than it used to, or only works if you push or pull the door at the same time
The key is stiff to turn once the handle is up
Bright scuff marks on the keeps or the bottom of the frame
A draught or daylight along the top of the door on the lock side
The door has to be pushed or slammed to latch
Why uPVC doors drop
The hinges carry the whole weight of the door, and over time they wear and their fixings loosen. Doors that are opened many times a day, or held open in the wind, wear them faster.
In a door with a large glazed panel, the glass is held square in the frame by small packers set in under it. If the packing shifts, or was never right, the corner of the door furthest from the hinges can slowly sag.
uPVC also moves a little with temperature, so a door that is only just in line in winter can become stiff to lock on a hot afternoon. If it only happens in warm weather, the door is close to its limits and a small adjustment can cure it.
What you can safely try
Start by checking the screws in the hinges and the keeps on the frame. A keep that has worked loose can move just far enough to stop a hook engaging, and tightening it may be all that is needed.
Many uPVC doors have hinges that can be adjusted up and down, side to side and for how tightly the door closes against its seals, usually with an Allen key under a cover cap. Small changes, made one hinge at a time, can lift a dropped door back into line. Be careful with the setting that pulls the door into the frame. Set too tight, it makes the door hard to lock even when everything else is right.
If you are not sure which way to turn something, or the door is still stiff after a small adjustment, leave it there. Never force the handle up against resistance, and never use a tool on it for extra leverage. Forcing a door that has dropped can break the gearbox behind the handle, and replacing it is a bigger job than the adjustment would have been.
What the repair involves
A repair starts with finding out what has moved, the hinges, the glass packing, the keeps or the lock itself. Then the door is lifted back into line on its hinges, worn hinges are replaced, the glass is re-packed if the door has sagged, the keeps are reset so every point engages, and a damaged gearbox or locking strip is replaced. If a door that has been slammed to shut it has cracked its glass, the replacement should be safety glass, because the building regulations for doors and windows treat glazing in a door up to 1500mm from the floor as a critical area. Our repairs service fixes locks, handles and door alignments on uPVC, composite, aluminium and bi-fold doors.
When the right part has to be ordered, a temporary fix can keep the door secure in the meantime. That is how we handled one customer's window hinges and door locking mechanism in September, fixing it on the first visit and coming back with the right parts. A repeat customer in Maidstone had a back door lock replaced along with window hinges and three misted units in the summer, and another customer wrote in August that we came out as quickly as possible to fix the problem with their front door.
While the door is being worked on, it is worth looking at the cylinder. The Master Locksmiths Association explains how lock snapping targets weak euro cylinders and advises one approved to Sold Secure Diamond, or at least TS007 3 star. The other things that make the most secure front door apply to a uPVC door too.
Is it urgent?
If the door won't lock at all, yes. A door that can't be secured should be sorted the same day, even if that means a temporary fix first. If it locks but is stiff, it is less pressing, but it will not improve on its own. Every time the handle is forced against a misaligned keep, the gearbox takes the strain.
The same problem on other doors
The same thing happens to other doors. French doors drop on their hinges in the same way, sliding patio doors drag when their rollers wear, and bi-folds sag in ways that look much the same, which is covered in a dropped bifold door. Windows have their own version, and the causes and fixes for a window that won't lock follow the same pattern of a part out of line rather than a failed window.
Repair or replace?
A dropped door is a repair, not a reason for a new door. Replacement makes sense when the door itself has failed, a frame that is cracked or bowed, a panel that is damaged or a door that was never the right size for the opening. The questions to ask are set out in repair or replace your double glazing.
If you are replacing anyway, it is worth knowing what you are comparing. PVCu and uPVC are the same material under two names, and the choice between a composite or a uPVC front door matters more than the spelling.
If your uPVC door is hard to lock, send us a short video of it on WhatsApp or contact us at KM Glazing, and we will tell you whether it needs an adjustment, a new part or something more.

